A comparison of steady-state evoked potentials to modulated tones in awake and sleeping humans.

Steady-state evoked potential responses were measured to binaural amplitude-modulated (AM) and combined amplitude- and frequency-modulated (AM/FM) tones. For awake subjects, AM/FM tones produced larger amplitude responses than did AM tones. Awake and sleeping responses to 30-dB HL AM/FM tones were compared. Response amplitudes were lower during sleep and the extent to which they differed from awake amplitudes was dependent on both carrier and modulation frequencies. Background EEG noise at the stimulus modulation frequency was also reduced during sleep and varied with modulation frequency. A detection efficiency function was used to indicate the modulation frequencies likely to be most suitable for electrical estimation of behavioral threshold. In awake subjects, for all carrier frequencies tested, detection efficiency was highest at a modulation frequency of 45 Hz. In sleeping subjects, the modulation frequency regions of highest efficiency varied with carrier frequency. For carrier frequencies of 250 Hz, 500 Hz, and 1 kHz, the highest efficiencies were found in two modulation frequency regions centered on 45 and 90 Hz. For 2 and 4 kHz, the highest efficiencies were at modulation frequencies above 70 Hz. Sleep stage affected both response amplitude and background EEG noise in a manner that depended on modulation frequency. The results of this study suggest that, for sleeping subjects, modulation frequencies above 70 Hz may be best when using steady-state potentials for hearing threshold estimation.     

Estimation of multivariate binary density using orthogonal functions

In this paper, the authors studied certain properties of the estimate of Liang and Krishnaiah (1985, J. Multivariate Anal. 16, 162–172) for multivariate binary density. An alternative shrinkage estimate is also obtained. The above results are generalized to general orthonormal systems.     

A New Distribution Function for Risk Analysis

This paper presents an alternative to the beta continuous probability distribution for risk analysis. Particular attention has been given to two major applications of distributions, namely project management risk and critical path analysis (PERT). In conjunction with the beta, the triangular and normal distributions are frequently employed in order to give sufficient robustness to risk analysis. The beta distribution, as used in PERT, has a major theoretical implementation flaw. The new distribution was developed to give a possible alternative method of assessing risk. It is shown that the requirement to estimate the most pessimistic variate may be replaced by the probability to exceed the mode. Proposals for other simplifications in risk analysis are discussed. Practical means to validate the most appropriate distributions for risk analysis are outlined, and a cost-data case study is included.     

Electroactive conducting polymers for corrosion control

There is an intensive effort underway to develop new corrosion control coatings for structural metals. In part, this effort has been motivated by the desire to replace chromium(VI)-containing coatings currently used for corrosion control of iron and aluminum alloys. Cr(VI) has been shown to be hazardous to the environmental and to human health, and its use in many countries will be sharply curtailed in the coming years. Electroactive conducting polymers (ECPs) represent a class of interesting materials currently being explored for use in corrosion control coating systems, possibly as a replacement for Cr(VI)-based coatings. The electroactivity and the electronic conductivity (or semiconductivity) of ECPs set them apart from traditional organic coatings. As with chromate, interesting and potentially beneficial interactions of ECPs with active metal alloys such as steel and aluminum are anticipated, with concomitant alteration of their corrosion behavior. A review of this active research area will be presented in two parts. Here in Part 1, a general introduction to the topic of corrosion control by ECPs will be presented, including an overview of corrosion and its control by traditional methods, an introduction to ECPs and their properties, and a discussion of the processing issues surrounding the use of ECPs as coatings. Part 1 also includes a review of the literature on the use of ECPs as coatings (or components of coatings) on non-ferrous active metals, principally aluminum and aluminum alloys, although some work on zinc, copper, silver, titanium and silicon will also be described. In Part 2 of this review (to be published in the next issue of this journal), the rather extensive literature on the use of ECPs for the corrosion control of ferrous alloys (steels) will be reviewed. Electronic Publication     

Multicriteria decision making under uncertainty

Formalization for problems of multicriteria decision making under uncertainty is constructed in terms of guaranteed and weak estimates. A relevant definition of the vector maximinimax value is given. Parameterization and approximation of maximum, minimax, and maximinimax values based on the inverse logical convolution are suggested. An application for multicommodity networks is considered. Received: December 13, 2000 / Accepted: August 21, 2001?Published online May 8, 2002     

Patterns at the onset of electroconvection in freely suspended smectic films

We report the results of experiments on electrically driven convection that occurs in a thin, freely suspended film of smectic A liquid crystal when an electric field is applied in the plane of the film. Convection in a vortex pattern is found above a well-defined critical voltage. The film behaves as a two-dimensional isotropic liquid: neither its thickness nor the director field are modified by the flow. We present measurements of the critical voltage at the onset of convection in two experimental configurations—one which allows the injection of charges into the film from the electrodes, and one which does not. When injection is present, the critical voltage for the onset of flow increases monotonically with increasing frequency of applied field. With no injection, there is no instability at DC and the critical voltage diverges there. The nature of the flow pattern observed at onset changes with frequency. Below a certain frequency the film flows in vortices that extend over the width of the film; above this frequency the flow is confined to two lines of smaller vortices localized along the electrodes. We present a simple discussion of the mechanisms which drive the convection.     

富锌条件下生长氮掺杂氧化锌薄膜的光学和电学性质

报道了采用等离子体辅助分子束外延方法(P-MBE),利用NO作为N源和O源,在c-面蓝宝石(c-Al₂O₃)衬底上外延生长了N掺杂ZnO薄膜。X射线衍射谱(XRD)和吸收谱中都出现了不同于未掺杂样品的特性,X射线光电子谱(XPS)中也发现了N的受主信号。但是在霍尔效应(Hall-effect)测量中,发现该样品并没有出现预期的p型导电特性,而是出现载流子浓度很高(2.15×10²⁰cm^-3)的n型导电特性。结合XPS结果和理论分析,认为在富Zn条件下生长会导致过量的填隙Zn原子,补偿了全部的受主后,又促使其出现了从半导体-金属的Mott转变。     

Molecular mobility in hydrogels based on poly(acrylic acid) and macrodiisocyanates

Partially water-swellable polymer networks were synthesized on the basis of poly(acrylic acid) and various macrodiisocyanates. Hydrophilic and hydrophobic local regions were revealed in swollen networks (hydrogels) by means of the spin probe technique. The local mobility in hydrophobic regions depends on the macrodiisocyanate structure; however, it is substantially lower than that in hydrophilic regions for all gels. It was assumed that the presence of hydrophobic and hydrophilic regions and the difference in their local dynamics must have a substantial effect on the pharmacokinetics of release of drugs immobilized in these hydrogels.     

Effects of annealing conditions on the electrical properties of Bi4-xNdxTi3O12 (x = 0.46) thin films processed at low temperature

Neodymium-substituted Bi₄Ti₃O₁₂ (BNdT) thin films were prepared by a chemical solution deposition technique on platinum- coated silicon substrates. All of the samples were annealed at the relatively low temperature of 600 °C by a rapid thermal annealing process in different atmospheres, such as O₂, air, and nitrogen, and vacuum. Irrespective of different annealing atmospheres, all of the BNdT thin films exhibit good ferroelectric properties, such as a saturated hysteresis loop, good fatigue endurance, and low leakage current density. A large remanent polarization (P_r) of ∼48 μC/cm² with an electric field of 240 kV/cm was observed from the BNdT thin film annealed in O₂ atmosphere. The BNdT thin films annealed in nitrogen and vacuum, at reduced oxygen partial pressures, exhibit smaller P_r than that annealed in oxygen. The difference of P_r of the BNdT thin films annealed in different atmospheres may originate from differences in the grain sizes and the number of oxygen vacancies. PACS 77.55.+f; 77.80.-e; 77.80.Fm; 81.15.-z